Light Gauge vs. Structural Steel Construction

Posted by Brett McCutcheon on May 25, 2019, 8:49:00 AM

Steel Construction

Steel has an outstanding strength-to-weight ratio and flexes with force, which is why it’s commonly used for large construction projects. Steel is the ideal material for high rise buildings because it can withstand high winds, earthquakes and other stressors. Due to its strength, steel frames require fewer vertical supports, which in turn makes them more cost effective. Steel is also considered an eco-friendly material because all steel products contain recycled steel, and in framing, they typically contain a minimum of 25%. There are two options when it comes to steel framing: light gauge and structural steel. Here is a comparison of the two methods, and their best applications.

Light Gauge

This steel is cold formed, which creates long, thin sheets that are then shaped into guided “C” or “Z” patterns capable of holding heavy loads. Light gauge supports come in a galvanized finish of zinc, aluminum or a combination of the two. For this construction process, a load-bearing wall is constructed first, then interior partitions and exterior cladding follow.

Light gauge is most commonly used in residential or light commercial construction as an alternative to wood framing. It’s similar to wood in that little cutting and sizing is required on the job site because the studs are manufactured to precise lengths. However, light gauge steel won’t rot, warp, burn or harbor insects like wooden frames. Due to their strength, light gauge steel frames also require less studs because they can be placed further apart. In general, light gauge will produce less waste, which is more environmentally friendly and more cost effective than alternatives like wood. Its main disadvantage is in case of fire, rather than burning, the steel structure will lose some of its stability and there is potential for collapse.

Structural Steel

Structural steel is hot rolled, and once hardened it becomes incredibly strong. For comparison, a one-inch circular bar that is firmly attached to supports can hold 20 tons. Structural steel is used in heavy duty construction projects such as multi-story buildings, bridges and industrial plants. Its strength and flexibility allow it to withstand moderate seismic activity, heavy traffic loads and high winds.

While concrete and stone can be used in similar projects, structural steel is able to provide stability and strength at great heights unlike the alternatives. However, when combined with steel, concrete can provide a higher level of support for large infrastructures.

The downfall of structural steel is its weight. It requires heavy trucks for transportation and must be placed with cranes. For this reason, structural steel is rarely used in residential or light commercial construction because it’s cumbersome and expensive. Medium-size commercial construction can use either light gauge or structural steel, it just depends on the needs of the project.

Structural steel and light gauge framing are quite different in both production of the steel, application and fastening methods. Structural steel requires thicker and heavier fastening methods, such as welding, bolting or riveting. Light gauge steel on the other hand can be fastened more simply with steel screws. Steel framed structures have long presented a fastening problem for trim contractors. Traditional finish nails will not penetrate most load bearing steel members and regular hardened fasteners are not suitable for finish work.

ET&F® Fastening Systems, a Sister company of FASCO America®, offers tools, fasteners and systems for installing steel studs. For example: wood to steel, steel to steel, face nail siding, and gypsum wall board fastening, plus more! See what they have to offer steel framers http://www.etf-fastening.com. FASCO America® offers the SteelThread SCRAIL® that is a faster fastener and works in a variety of applications. It is ideal for non-code housing, flooring, subflooring, framing, decking, and SteelThread SCRAIL® will install perfectly every time. It also has the necessary durability and holding power for a long-term and reliable solution.

Download the SteelThread Product Brochure

Topics: Construction Fasteners, Steel Studs, Steel Thread

CURRENT PROMOTIONS

10% Discount on Your First SCRAIL® Fastener Order

SCRAIL®, The Faster Fastener®, are incredibly versatile collated fasteners that can be driven with a pneumatic nailer at a rate twice as fast as collated screws and eight times faster than bulk screws. You can rely upon SCRAIL® fasteners to hold strong, without callbacks to fix a squeak or a nail pop.

Give SCRAIL® a try, and enjoy 10% off your first order.

  • Use Scrail® almost anywhere ordinary screws are used
  • Save time and labor costs 
  • Twice as fast as collated screws, eight times faster than bulk screws
  • Easily adjusted, quickly removed
  • Dramatically increased holding power vs. nails
  • Making projects easier since 1998.

Subscribe to this blog

Recent Posts